BPPCO - al barshaa plastic product company

PIPE OUTER END CAPS DIMENTION AND SPECIFICATION

OUTER END CAPS FOR PIPES

BPPCO manufactures Protective End caps for Pipes, tubes and rods. Standard sizes (see table below) are always in Stocks. Custom Caps can be designed and developed in many different diameters, colors, wall thickness and lengths to satisfy the customer’s need within a short span of time.

Key Product Features :

Used to protect the Pipe from penetration from sand and dirt during transport and storage.
Great for use during paint and masking operations.
Manufactured from a high end LDPE Plastic
Blue in color

TECHNICAL SPECIFICATION FOR PIPE END OUTER CAPS
INCH	DN	A (mm)	B (mm)	T (mm)	C (mm)	MATERIAL	WEIGHT (Grm)
0.5	DN 15	21.3	23.5	1.1	30	LDPE	3.10
0.75	DN 20	26.7	28.9	1.1	30	LDPE	4.05
1	DN 25	33.4	36	1.3	30	LDPE	5.20
1.25	DN 32	42.2	45	1.4	30	LDPE	7.10
1.5	DN 40	48.3	51.5	1.6	30	LDPE	9.05
2	DN 50	60.3	63.5	1.6	40	LDPE	13.70
2.5	DN 65	73	76.2	1.6	40	LDPE	17.10
3	DN 80	88.9	92.1	1.6	40	LDPE	21.00
3.5	DN 90	101.6	104.8	1.6	40	LDPE	29.45
4	DN 100	114.3	117.5	1.6	40	LDPE	30.30
5	DN 125	141.3	144.5	1.6	40	LDPE	40.70
6	DN 150	168.3	171.5	1.6	40	LDPE	56.50
8	DN 200	219.1	222.5	1.7	50	LDPE	101.70
10	DN 250	273	276.8	1.9	50	LDPE	169.20
12	DN 300	323.6	327	1.7	50	LDPE	242.00
14	DN 350	355.6	359.6	2	55	LDPE	345
16	DN 400	406.4	410.4	2	65	LDPE	402.00
18	DN 450	457.2	461.6	2.2	65	LDPE	600.00
20	DN 500	508	512	2	65	LDPE	610.00
22	DN 550	55.8	465.2	3.2	45	LDPE	762.00
24	DN 600	609.6	614.8	2.6	50	LDPE	960.00
26	DN 650	660	666	3	60	LDPE	1072.00
28	DN 700	711.2	716.8	2.8	61	LDPE	1200.00
30	DN 750	762	768.2	3.1	75	LDPE	1905.00
32	DN 800	812.8	819	3.1	75	LDPE	1555.00
34	DN 850	863.6	870.6	3.5	85	LDPE	2700.00
36	DN 900	914.4	922	3.8	85	LDPE	2900.00
40	DN 1000	1016	1023.6	3.8	90	LDPE	4750.00
42	DN 1050	1066.8	1074.8	4	100	LDPE	5255.00
44	DN 1100	1117.6	1125.6	4	100	LDPE	5700.00
46	DN 1150	1168.4	1176.4	4	115	LDPE	6800.00
48	DN 1200	1219.2	1227.2	4	115	LDPE	7000.00
54	DN 1350	1371.6	1379.8	4.1	125	LDPE	8050.00
56	DN 1400	1422.4	1431.4	4.5	125	LDPE	9000.00
60	DN 1500	1524	1534	5	125	LDPE	12000.00

Note:-

All the above mentioned caps are made of internationally approved.
Low Density Polyethylene.
General tolerance of 1 to 2% will be applicable for weight.

PIPE INNER END CAPS DIMENTION AND SPECIFICATION

INNER END CAPS FOR PIPES

Plug type Protective End caps for Pipes and tubes. Custom sizes can be designed and developed in many different diameters, colors, wall thickness and lengths to satisfy the customer’s need within a short span of time.

Key Product Features :

Used to protect the Pipe from penetration from sand and dirt during transport and storage.
Great for use during paint and masking operations.
Manufactured from a high end LDPE Plastic
Blue in color

TECHNICAL SPECIFICATION FOR PIPE END INNER CAPS
Φ (Diameter)	H (mm)	Weight (gram)	MATERIAL
Φ 4	35 mm	36	LDPE
Φ 6	36 mm	62	LDPE
Φ 8	38 mm	95	LDPE
Φ 10	44 mm	182	LDPE
Φ 12	56 mm	292	LDPE
Φ 14	77 mm	366	LDPE
Φ 16	77 mm	495	LDPE
Φ 18	80 mm	664	LDPE
Φ 20	80 mm	817	LDPE

Note:-

All the above mentioned caps are made of internationally approved.
Low Density Polyethylene.
General tolerance of 1 to 2% will be applicable for weight.

PIPE END CAPS DIMENTION AND SPECIFICATION

RECESSED END CAPS

Our Recessed end caps are used to protect bevel/edges from damage. These ends caps are highly customizable according to pipe schedule.

Key Product Features :

The Recessed Cap closes the pipe and prevents penetration of dirt and insects during transport and storage of pipes.
Manufactured from a high end LDPE Plastic.
Fast and easy application
Suitable for hook lifting
High UV stability
These caps can be reinforced with a steel inlay to improve bevel protecting qualities

PIPE INNER END CAPS DIMENTION AND SPECIFICATION

INNER END CAPS

Key Product Features :

Used to protect the Pipe from penetration from sand and dirt during transport and storage.
Great for use during paint and masking operations.
Manufactured from a high end LDPE Plastic
Blue in color

TECHNICAL SPECIFICATION FOR PIPE END INNER CAPS
Φ (Diameter)	H (mm)	Weight (gram)	MATERIAL
Φ 4	35 mm	36	LDPE
Φ 6	36 mm	62	LDPE
Φ 8	38 mm	95	LDPE
Φ 10	44 mm	182	LDPE
Φ 12	56 mm	292	LDPE
Φ 14	77 mm	366	LDPE
Φ 16	77 mm	495	LDPE
Φ 18	80 mm	664	LDPE
Φ 20	80 mm	817	LDPE

Note:-

All the above mentioned caps are made of internationally approved.
Low Density Polyethylene.
General tolerance of 1 to 2% will be applicable for weight.

2020刘伯温精选资料大全

Pipe End Caps

All rights reserved © 2020 - bppcouae.com